SUBMERSIBLE PUMP
INTRODUCTION
The pumps are carefully inspected and tested to ensure both safety and operating performance;
however, failure to follow the instructions and warnings in this manual may result in pump damage
and/or serious injury. Be sure to read and save this manual for future reference.
PUMP INSTRUCTIONS
W
W
WA
A
AR
R
RN
N
NIIIN
N
NG
G
G
z
Ensure that the electrical cord loops below the electrical outlet to form a ‘Drip Loop’. This will
prevent water from running down the cord into the electrical outlet.
z
Risk of electric shock- This pump is supplied with grounding conductor and grounding-type
attachment plug. To reduce the risk of electric shock, be certain that it is connected only
to properly grounding-type receptacle.
z
Do not remove the grounding pin from the plug.
z
Do not connect to any voltage other than that shown on the pump.
z
Do not pump flammable liquids.
z
The National Electric Code requires that a ground fault circuit interrupter (GFCI) be used in the
branch circuit supplying fountain pumps and other pond equipment. See your electrical sup-
plies dealer for this device.
z
Do not use with water above 50
℃
(122
°
F).
Model#
Description
Volt.
Power
BEO
-
5
0
00
A
water
pump
120V
Frequenc
y
Flow Height
Flow Vol
u
me
60Hz
3
m
3
5
00
L/
hour
NOTE: The pump data in this manual is from
lab tests. The actual pump may be different
due to the method of production or technical
improvements. This data can be used as a
reference when purchasing a similar pump.
Filter Gland
Rotor
Outlet
Pump housing
Cover
Suction cap
85W
1-866-771-2663 | Page 15
