T
URN
O
N
Plug in the power plug
to
turn on the power
; this
will
start the fountain
’s water
pump
.
T
URN
O
FF
U
nplug the power plug or turn off the
power, the pump will
turn off
and stop work
.
N
OTE
:
1. Drain the water if you
don’t plan to
use the fountain for a long time to prevent mosquito
breeding and water odor.
2.
Be sure to
drain
all
water
during
winter
months or cold seasons
to prevent
reservoir
from
cracking or breaking.
3. See the instructions below for draining the water in reservoir.
Risk of electric shock. Install only to a
covered class A GFCI receptacle that has
an enclosure that is weatherproof with the
attachment plug cap inserted or removed.
Risk of electric shock. Mount the unit at a
height greater than 0.3 m from the ground
surface.
WARNING
WARNING: Please check and
ensure the power cord is not dam-
aged before using this appliance.
1. Unplug the power p
lu
g, remove the
decorative ring (A) .
2
. S
ubmerge the drain hose (
Q
) completely in
the reservoir, full
y
fill the hose with water and
seal the two end
s
with
two
thumbs or fingers
.
Then put one end of the hose into the reservoir
and the other end outside the body, make sure
the outside end is lower than bottom of the
reservoir. R
emove the
two
sealing
thumb
s
or
fingers
at the same time, the water will flow out
through the drain hose.
A
Q
1. Unplug the power p
lu
g, remove the
decorative ring (A) .
Bond Manufacturing Co., Inc. | Page 12
