9
TO E
X
TINGUIS
H
Push the Control Knob and turn clockwise to the "OFF" position.
Turn the cylinder valve on the gas tank clockwise to close the gas supply if not in use for a long time.(See figure
below)
ROUTINE CARE
Keep your firebowl free and clear from combustible materials.
Visually inspect burner from obstructions and keep fireplace free and clear from debris.
After the burner and lava rocks are completely cooled down, use a soft brush to get rid of the mild stains, loose
dirt and soil. Wipe with a soft cloth.
STUBBORN STAINS
Stubborn stains, discoloration and possibly rust pitting can occur from exposure to harsh outdoor conditions.
Be careful not let any powder or solvent come in contact with painted or plastic components as damage may occur.
MAINTENANCE
Store the firebowl in a cool dry place away from direct sunlight.
The propane cylinder must be disconnected and removed from the firebowl before the appliance can be stored indoors.
Make sure both the gas and the firebowl are turned off before changing battery. Please refer to the process of assembling
battery.
Use Manufacturer approved or supplied replacement parts and accessories only. Otherwise this may void the warranty of
this product and result in a hazardous condition.
Please contact the Manufacturer for information regarding replacement hoses, thermocouples, ignitors, lava rocks, etc.
•
•
•
•
•
•
•
•
•
•
•
•
TROUBLESHOOTING
PROBLEM
CORRECTIVE ACTION
Fire table won't
light
Igniter pin and burner are wet Wipe dry with a cloth
Igniter battery is incorrectly
inserted.
Check that battery is correctly inserted
Igniter pin cracked or broken
Call customer service for replacement
part
Electrode wire is loose or
disconnected
Reconnect wire to the igniter
box located inside the table
base behind the igniter button
Electrode wire is shorting
between valve and igniter pin
Call customer service for replacement
part
