- 16 -
5-J: Assembling the Scaler Unit
1.
Switch the power of the KRUUSE-SP1 off. The power indicator should not be lit if the
machine is off.
2.
Plug the power cord of the main unit into a grounded AC power outlet.
3.
Install an insert into the hand piece pushing it into the hand piece until it is firmly seated.
4.
Check the water tube connection to the water supply source and main unit.
Section VI: General Description and Information of Parts
1.
Main unit
5.
Water control knob
9. Water hose input
2.
Hand piece
6.
Power control knob
10. Power cord socket
3.
Power button
7.
Micro-motor socket
11. Forward/Reverse switch
4.
Micro-motor (Mode) button
8.
Foot switch socket
Figure 2. KRUUSE-SP1 diagram
1.
Main Unit
The main unit generates power and produces a signal that is passed to the hand piece. The
hand piece is then powered up and vibrates the installed insert.
2.
Hand piece
The hand piece is the housing for scaling inserts. Inserts are interchangeable and can be
installed with a firm push. To remove the insert, hold the insert at the grip and pull from the
hand piece. Be careful not to cut yourself in the process. Inserts that are compatible with
the KRUUSE-SP1 are made by: Bonart, Dentsply and Hu-Friedy.
