Page | 10
Operation Instructions
BONAIRE PORTABLE COOLER
Oper ation In struct ions
Placement
It is essential for successful operation of the evaporative cooler that there be sufficient free air openings in
the room to be cooled
– approximately 0.5m² (5.4² feet). Open doors and windows will usually provide this.
Your cooler must be positioned in front of an open window or door if it is to operate effectively. Always
ensure that there is another open window or door through which the air can exhaust from the room.
Cooler Operation
Before Starting
Always ensure that there is another open window or door through which the air can exhaust to other
parts of the house.
Ensure that the filters are kept clean.
Ensure that the water to the cooler is turned on or that the tank has been manually filled with water.
Ensure the plug is connected to a 110V 60Hz single phase grounded appliance socket on the inside
of the house and turned on.
IMPORTANT.
After the first 10 hours of operation in COOL mode, the water must be
drained from
the unit water tank to remove any new product residuals. This process must be repeated after a
further 10 hours of COOL mode operation.
IMPORTANT:
Wheels
MUST BE
locked while operation unit.
Operating the Unit
The Durango Portable Cooler can be operated in either Manual or Auto (Remote) mode. This is selectable
by the toggle switch on the front panel. Each mode has COOL and FAN functions available.
Manual Mode
:
COOL Mode: -
Move control knob to “COOL” side. Select
desired fan speed
1
– Low/Sleep Mode
2 - Normal Operation
Max - Quick Cool down
The unit will now operate with the fan motor and water
pump activated.
FAN Mode: -
Move the control knob to the “FAN” side .
Select desired fan speed
1
– Low/Sleep Mode
2 - Normal Operation
Max - Quick Cool down
The unit will now operate with the fan motor only activated.
To turn the unit off, rotate the control knob to the
“
O
”
position
