Page | 7
Installation
BONAIRE PORTABLE COOLER
Install ation
Unpacking The Unit
Important
When you receive your unit the wheels, remote
control and accessory bag will be located inside
the box.
Wheel Assembly
Before installing the wheels the unit
MUST
be laid
down as shown.
As shown in the picture, lie the unit down carefully and place
the wheel screw end in to the recess under the tank as shown.
Then tighten the wheel in by using the spanner. Once all 4
wheels are assembled then carefully stand up the unit without
damaging a rear filter panel.
Note:
Wheels must be locked when operating the unit. To lock
and unlock the wheels please refer the picture.
Press to
Lock
Lift to
Unlock
Spanner
Lockable wheels
fitted to front
