Page | 12
Operation Instructions
BONAIRE PORTABLE COOLER
Remote control operation
1.
POWER
(Start and stop operation)
2.
FAN
– LOW
(starts low fan speed but there will be no pump operation until button 5 is pressed)
3.
FAN
– MEDIUM
(starts medium fan speed but there will be no pump operation until button 5 is
pressed)
4.
FAN
– HIGH
(starts high fan speed but there will be no pump operation until button 5 is pressed)
5.
Cool
(turns pump and fan continues to operate on previously selected speed)
6.
NOT APPLICABLE FOR THIS MODEL
7.
NOT APPLICABLE FOR THIS MODEL
8.
NOT APPLICABLE FOR THIS MODEL
9.
PUMP ONLY
(turns pump on at first button press & turns pump off at second button press. NOTE:
there will not be any fan operation with this function, pump only)
NOTE:
For pump only operation the
button is selected, the operation will be as follows:
1. The pump only button
can only be activated only when the power is on.
2. If the cooler is running pressing
will turn off fan and turn on main pump (If the main pump is on
before
pressed, it will only turn off fan).
3. Press
to turn off the main pump. If the pump only function is required again press
and then
to turn on the main pump.
4. If cooling is required when the main pump is running on, press Cool
，
and this will start the fan while
the main pump continues to run.
5.
When the pump only function is selected by pressing
, you cannot start the fan by pressing the
following buttons
/
/
..
