16
BELT HD TAURUS User Manual_January 2014 Edition
Machine warnings
Prohibited use
WARNING
This equipment is not to be used by anyone (children included) with physical or mental disabilities, or anyone
without the relevant experience and knowledge, unless they have received instructions on using the
equipment and are supervised by a responsible person to ensure their safety.
WARNING
This equipment is not suitable for collecting hazardous dust.
CAUTION
Using the machine to move objects or moving on an incline may cause injury or
damage. The machine must only be used to sand dry wooden floors which are level or
have a maximum incline of 2%. Do not use the machine to sand furniture. Do not sit
astride the machine when it is operating.
CAUTION
Work surfaces may be seriously damaged if the machine is left turning on one point
while the tool is in contact with the surface. To avoid damaging the surface approach
the cutting line carefully. Do not stop when lowering and raising the equipment, keep
moving at constant speed.
Starting the machine
To start the machine proceed as follows:
1.
Become familiar with the
machine
and
read
all
instructions
and
safety
notices.
Ensure
that
all
operators have read this
manual.
2.
Arrange the dust bag as indicated by the yellow arrow and secure it with
the cord.
3. Locate the power supply. The socket must be compatible with the plug. To avoid electrical hazards the socket
must be earth protected with a 20 A fuse.
4. Wind the cable round the cable safety arm (as
shown in the photo at the side) to keep it away
from the path of the machine.
.