22
BELT HD TAURUS User Manual_January 2014 Edition
Machine adjustment procedures
Wall edge castor
A support with a free castor has been fitted to avoid damage to the skirting board or wall when sanding along the
wall.
WARNING
The wall edge castor is correctly positioned
when the machine is approximately 8 mm
away from the wall with the castor up against
it.
Before starting work position the castor correctly by unscrewing the
screw (pos. 12 fig. C), moving the support to the required position and
tightening the screws.
Wheel adjustment (on a surface parallel to the axis of the drum)
Before sanding check drum operation on the work surface.
The diagram shows the two
possible cases:
- OK = drum and wheels are
parallel to the surface to be
sanded and the mark left by
the drum is the total roller
length (approx. 200mm).
- NO = the drum does not rest
fully on the surface and only
sands
at
one
part,
emphasising marking on the
floor.
In this case the drum and wheels must be positioned parallel to the surface to be sanded by varying the height of
the cam wheel.
