25
BELT HD TAURUS User Manual_January 2014 Edition
Routine maintenance to be performed
Dust bag (for the user)
As an alternative to the fabric bag the following may be used:
a) Disposable paper bags, available in packs of 3
(P/N 6300030142).
The limit for use is 1/3 of the total capacity.
b) Remote control industrial vacuum cleaner with tube
with maximum length of 10 metres.
Belt tension (for the user)
Check belt tension regularly. For adjustment
procedures see page 6 of this manual.
If the belt is excessively worn it must be replaced.
CAUTION
Excessive belt tension may cause the premature failure of the ball bearings.
The belt must have a 10.5 mm stretch with a centre load of 30
3 N.
Bearings (only for Technical Support Service)
Check bearings regularly for wear or damage according to the following timescales:
WHEELS:
after the first 2500 hours
FAN SHAFT:
after the first 2500 hours
SANDING DRUM:
after the first 5000 hours
MOTOR SHAFT:
after the first 5000 hours
