12
bona.com
Bona Edge Manual
Starting Machine Description
When sanding hold the machine, use both handles and move the machine in circles in the
direction of rotation over the surface which is to be sanded. It is important that the machine rests
on three points, both the wheels and the sanding disc.
The best result is obtained by letting the machine work with its own weight.
When using fine abrasives you must be careful not to make any burn marks due to high friction
created.
In addition to the points noted the sanding must be adapted to the type, patter and composition
of the floor.
Working method
Machine use
The machine is intended for the edge sanding of wooden floors. It maybe used on newly laid and untreated floors and existing floors that have been
treated with lacquer or oil.
The main function of the machine is to serve as a complement to a belt or a drum sander for sanding edges.
The machine has been thoroughly checked and approved before leaving the factory.
Starting the machine
1)
Become familiar with the machine and read all instructions &
safety notices. Ensure that all operators read this manual.
4)
Fit the disc in accordance with the
'Abrasive Assembly
Procedures'
(pg.15-16).
2)
Bring the machine to the place of work.
3)
If using DCS, connect DCS pipe and suction pipe of the machine. If
using a dust bag, place the dust bag on the suction pipe.
Summary of Contents for Edge AMO230009.3
