Bona
Edge
Wheel adjustment
OK
The distance between the underside of the motor bracket and
the floor should be approx. 83 mm on the left side and 75 mm on
the right for standard arm.
Footprint should be as above
to get the best result.
Note! If the whole disc is flat and in full
contact with the floor it will create
excessive resistance in the motor,
leave circular scratch marks, and the
machine will be hard to handle.
Handle adjustment
1.
The angle of the handles can be adjusted for a more
comfortable working position. Use Torx wrench T30.
Dust collection
1.
For minimal dust
discharge Bona ’s original
dust bags shall always be
used. The dust bag must
be emptied when it is filled
to max 1/3.
2. When emptying the dust
bag, remove the dust tube,
together with the dust
bag, completely, open the
zipper and empty the
contents.
9
