Bona
Edge
TECHNICAL DATA
EU
USA
Motor type:
1-phase 1-phase
Voltage (+/- 10%):
230V 115V
Frequency:
50 Hz
60 Hz
Power:
2,0 kW
2,68 hP
Rated current:
10A 15A
Recommended fuses:
10A 20A
Isolation class:
F F
Safety class:
IP54 IP54
Sanding disc speed:
Ca 3 000 rpm normal load
Approx. 3 000 rpm normal load
Illumination:
20W halogen
20W halogen
Total weight
:
12,5kg -15,5kg
27,5 lbs – 34lbs
Dust discharge:
<1 mg/m³
air <1
mg/m³
air
Abrasive disc diameter:
178mm 7”
Sanding arm length:
130mm, 220mm alt. 330mm
5”, 9” or 13”
Sanding arm height:
51mm
~2”
Hour meter
99 999 hours
99 999 hours
Noise measurement according to SS-EN ISO 3746:1995 & SS-EN ISO 11202:1995:
Abrasive
80
Noise level:
91,6 dB(A)
Calculated sound effect:
98,2 dB
Vibration measurements according to SS-EN ISO 5349-2:2001:
X
Y Z
Vibrations RMS (m/s²)
1,1
1,1 0,8
Vibrations vector sum (m/s²)
1,7
According to used standard SS-EN ISO 3746:1995 is the maximum standard deviation of reproducibility 3dB, defined in ISO 7574-1.
According to Swedish Work Environment Authority the measure uncertainty at vibrations measurements estimated to 20-40%.
The thing that contributes to the measuring uncertainty is the transfer of vibrations to the accelerometer.
We congratulate you on your choice of a new Bona Edge sanding
machine.
Carefully read through the entire user manual before you begin working with the
machine. If anything is unclear, turn to your reseller with confidence or to Bona
AB.
Safety instructions
Read through the safety instructions carefully and inform your employees and users, so no one comes to
harm when using the machine. Then save the instructions!
The manufacturer is not liable for personal injury or machine damage due to incorrect operation of the
machine!
The machine is only built for sanding of wooden floors!
The machine may only be used by authorised persons that have been trained in its function.
Voltage:
Make sure the voltage stated on the machine’s rating plate corresponds to the voltage in the
power outlet before you start the machine.
NOTE!
It is obligatory to read and understand the user manual before the machine is used.
3
