Bona
Edge
10. Tighten the screw and washer as well as the stop screw
11. Place the pulley in its
right position.
12. Remount the sanding arm.
13. Replace the four screws.
N.B. Do not tighten the screws!
14. Place a screwdriver in
the hole and press
forward to tighten the
belt.
15. Tighten the four screws
while holding the sanding
arm in its position.
16. Remount the Velcro disc, pulley screw and the nut for the
Velcro disc.
N.B. Tighten the pulley screw very hard!!
Remount the belt cover.
Changing to an other sanding arm
.
Proceed in the same way as for changing the cogged belt.
13
