Bona
Edge
Repairs, Service and Maintenance
Service
Bona Edge is a high quality machine and is tested by authorised test personnel at the
factory before delivery. However, electrical and mechanical parts wear down and age
during long-term use.
In order to keep the machine in a safe and functioning condition, service must be
performed every 250 work hours or at least once a year. This service includes control of
wheels, cable stand, motor, tension device, sanding drum and handle shaft function is
controlled.
Only Bona's original parts may be used because the machine is considered unique,
otherwise safety functions can become impaired.
Always disconnect the power cable to the machine before it is cleaned, tools are
changed, maintenance is performed or when worn parts are replaced.
When you contact us in the event of a fault or to order spare parts, always specify the
type and serial number of your machine.
This information is located on the type sign of the machine.
The machine may never be cleaned using a high pressure washer or hose.
Spare parts and exploded views
On the Internet, you will find a list of spare parts and exploded views for Bona Edge and
other machines in our product range.
The address is:
http://spareparts.bona.com/
During the factory warranty period, service or repairs may only be carried out upon
approval by a manager at Bona Division Sanding and only performed by staff at Bona
AB or approved staff at Bona AB Division Sanding.
Other repairs (after the warranty period) of mechanical or electrical parts on the machine
may only be carried out by Bona AB Division Sanding approved staff or authorised
technician who has experience and knowledge concerning safety regulations.
SERVICE AND MAINTENANCE
All maintenance must be done on neutral machine!
Unplug from the wall outlet. Check cable and connectors
regularly. Always replace a damaged cord (slots, jacks or
cable connections) with a new original cable.
6
