background image

 
1  Introduction 

 

 

 

bon CP-50 

GA bon CP-50 Rev 1.0 E 271205

 

 

3/21

 

 

 

1 Introduction 

Dear Customer 

Thank you for purchasing our bon CP-50 chart projector. Please read the operating 
instructions carefully before using the projector. Keep these instruction manual safe for future 
use. 

Please observe the safety instructions.

 

If you have any further questions, please contact our customer helpline.

 

 
 
 
 
 
Meaning of the symbols in the operating instructions 
 

 

Caution!

 Please observe safety instructions with this symbol to prevent 

personal danger or damage to property. 

 

 

 

Important! 

Indicates particularly important information to maintain the 

function of the device/system or to extend its life. 

 

 

 

Note! 

Indicates information for correct use so that errors may be avoided. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
This publication may not be copied or transferred without prior agreement from bon Optic. 
bon Optic reserves the right to make changes in the interest of technical development. These operating 
instructions are not subject to updating. 
 

Summary of Contents for CP-33






















Reviews: