8
In all positions except zero (0) the red warn-
ing light and the oven light are on.
NOTE
: The yellow warning light comes on
according to thermostat variations. Before
putting food in to be cooked, the oven should
be pre-heated for at least 10 minutes.
USE OF THE ELECTRONIC TIMER (Fig. 5)
This allows the start time and cooking dura-
tion time to be programmed. If food does
not need to be watched, this timer can be
selected even when the user is absent.
Soon after installation and at any electrical
supply cut-outs the display flashes; the clock
must then be synchronized again to allow
programming.
SETTING THE TIMER TO THE CURRENT
TIME
- The current time is set by pressing the 2
buttons (
COOKING TIME
and
STOP
) and the "+"
or "-" button at the same time. Any previous
programmes are cancelled and the
AUTO
symbol flashes.
NOTE: when the
AUTO
symbol is flashing the
oven cannot be used manually.
"+" AND "-" BUTTONS
- Pressing the "+" or "- "buttons makes time
go up or down at variable speed according
to how long the button is pressed for.
MANUAL USE
- Press the
MANUAL
button: the
AUTO
symbol
goes out (if flashing or permanently on) the
SAUCEPAN
symbol lights up and the oven
can be used by adjusting the thermostat
knob and the selector switch according to
the instructions given in the manual.
AUTOMATIC OPERATION WITH END OF
COOKING AND DURATION TIMERS
- Let’s use an example: it is 9:25 am; you
want the oven to switch on at 11 am and
switch off at 12 pm (cooking time 1 hour).
- Press the
COOKING DURATION
button and
within 5 seconds press "+" button until it
shows 01.00, adjust using "-" button if nec-
essary. The
AUTO
and
PAN
symbols come
on permanently.
- Press the
END OF COOKING
button and within
5 seconds press "+" button until it shows
12.00. The
PAN
symbol goes out but the
AUTO
symbol remains permanently on.
- Move the oven thermostat knob to the
desired temperature, and the selector
switch to the required cooking method; the
red warning light comes on the oven light
comes on and the timer is ready to start: at
11am the oven will come on automatically
and the
PAN
symbol will light up.
- When cooking is over (12 am) the
AUTO
symbol flashes, the
PAN
symbol goes out
and a buzzer sounds; to turn off the buzzer
press any button.
- Move the thermostat and selector knob to
the OFF position.
SEMI-AUTOMATIC OPERATION WITH
COOKING DURATION SELECTION
- Let’s take an example: it is 11:35 am and
you want the oven to stay on for 25 minutes
from now on.
- Press the
COOKING DURATION
button and
within 5 seconds press the "+" button until
it shows 00.25, adjusting the time with the
"-" button if necessary. The
AUTO
and
PAN
symbols light up permanently.
- Turn the oven thermostat knob to the de-
sired temperature and the selector switch to
the required cooking method; the red warn-
ing light comes on, the oven light comes on
and the oven starts to operate.
- After 25 minutes the oven and the
PAN
sym-
bol go out. The
AUTO
symbol flashes and
the buzzer tells you that cooking is over: to
turn off the buzzer press any button.
- Then move the oven thermostat knob and
the selector switch to the OFF position.
MINUTE MINDER
- Press the
MINUTE MINDER
button and choose
the desired time using the "+" or "-" button.
- The
BELL
symbol lights up when the minute
minder is in use.
- When the pre-set time is over, the buzzer
sounds and the
BELL
symbol goes out.
BUZZER
- The buzzer sounds at the end of a pro-
gramme and lasts for a maximum of 7
For the user
