5
CONNECTING TO THE ELECTRICAL
MAINS
Installing a domestic appliance can be a
complicated opera which if not carried out
correctly, can seriously affect consumer
safety.It is for this reason that a profession-
ally qualified person should undertake the
task who will carry it out in accordance with
the technical regulations in force.In the event
that this advice is ignored and the installation
is carried out by an unqualified person, the
manufacturer declines all responsibility for
any technical failure of the product whether
or not it results in damage to goods or injury
to individuals.
“The installation must conform to the
standard directives”.
The manufacturer declines all responsibility
for any damage that
may be caused by unsuitable or unrea-
sonable use.
Warning :
• Always check before any electrical op-
eration, the supply tension shown on the
electricity meter, the adjustment of the
circuit-breaker, the continuity of the con-
nection to earth to the installation and that
the fuse is suitable.
• The electrical connection to the installation
should be made via
a socket with a plug with earth, or via an
omni pole cut-out switch. If the appliance
has a socket outlet, it must be installed so
that the socket outlet is accessible.The
manufacturer cannot be held responsible
for any accidents resulting from the use
of an appliance which is not connected to
earth, or with a faulty earth connection
continuity.
• Any queries regarding the power supply
cord should be referred to After Sales
Service or a qualified technician.
Warning! This appliance must be earthed.
In the absence of adequate earthing you
will notice that when touching the
metal parts of your appliance an electrical
dispersion can be felt due to the presence
of a radio interference suppressor.
IMPORTANT:
When the connection opera-
tion to the appliance terminals is finished,
tighten the cable clamp and close the cover.
(see diagrams in fig. 2 at the back of the
manual).
CAUTION
- Before doing any work inside the cooker,
disconnect the mains plug.
IMPORTANT: the manufacturer declines all
liability for damage due to failure to comply
with the regulations and standards in force.
Check that the appliance is correctly connected
to the earth (see diagrams in fig. 2 at the back
of the manual).
Installation
