40
SAFETY FEATURES
Stop and Go
Your appliance has a Stop and Go feature which, when activated, reduces the power of all cooking zones
in use to power level 1. When Stop and Go is activated, the cooking zone power levels and the setting of
the timer cannot be altered and the hob can only be switched off.
When Stop and Go is deactivated the cooking zones resume at the power level which was last set and
any programmed times will continue to run.
If the function is not deactivated within 10 minutes, the hob will switch off.
Activating/deactivating
-Touch the / sensor || (4).
Recall
-If the hob is accidentally switched off during use, you can restore all settings using this function. The
hob must be switched on again within 6 seconds.
-Switch the hob back on.
-Touch / sensor within 6 seconds of switching back the on.
System lock
The hob is fitted with a system lock to prevent it from being switched on without supervision.
If the hob is switched on when the system lock is active, sensor “key” (3) appears in the timer display for
a few seconds.
The system lock is deactivated if there is an interruption to the power supply.
Safety switch-off
Safety switch-off with an over-long cooking time
If one of the cooking zones is heated for an unusually long period of time (see chart) and the power level
is not altered, the hob will switch itself off automatically and the relevant residual heat indicator will light
up.
To use the cooking zone again, switch it back on in the usual way.
Power level
Maximum operating time in hours
1
10
2
5
3
5
4
4
5
3
6
2
7
2
8
2
9
1
