37
OPERATION
To switch the hob on
Touch the sensor ignition key (1).
0 will appear in each of the cooking zone displays. If no further entry is made, the hob will switch itself off
after a few seconds for safety reasons.
Setting and altering the power level
Scroll to the slide of the cooking area concerned until desired doneness.
The selected power level is shown in the cooking zone display.
Bridge cooking area
All the rear cooking zones can be combined with the ones in front of them to form a Bridge cooking area.
The cooking area is operated by the front cooking zone and the symbol appears in the display for the rear
cooking zone U (9).
Activating/deactivating
Booster
The cooking zones are equipped with a Booster.
When activated, the power is boosted for a maximum of 10 minutes so that large quantities can be
heated up quickly, e.g. when boiling water for cooking pasta.
Taking a pan off the zone whilst the Booster is in operation interrupts the Booster function.
The cooking zone will automatically revert to power setting 9 at the end of the booster time.
Cooking zones are networked in pairs to supply power for the Booster function.
When the Booster function is selected a proportion of energy is taken away from the linked cooking zone.
The following happens within the pairs:
-Auto heat-up is deactivated
-The power level is reduced
-The linked cooking zone is switched off.
To switch on the Booster
Scroll to the slide of the cooking area concerned until desired doneness.
The display shows the letter P.
To switch off the Booster
Select a different power level.
