BOMBARDIER Traxter 7415 Operator'S Manual Download Page 59

Page: 59 / 99

Oil Level

CAUTION:

Check level frequently

and refill if necessary. Do not overfill.
Operating the engine/transmission
with an improper level may severely
damage engine/transmission. Wipe
off any spillage.

LH SIDE OF ENGINE

1. Dipstick
2. Filler cap

With vehicle on a level surface and en-
gine not running, check the oil level as
follows:

1. Pull dipstick out and wipe clean.

1. Pull out dipstick

2. Reinstall dipstick until it bottoms.

3. Remove and check oil level. It should

be between lower and upper marks.

4. Add oil up to upper mark if required.

5. To add oil, remove seat then unscrew

filler cap. Use a funnel to avoid spill-
age. Do not overfill.

6. Properly reseat dipstick, reinstall and

tighten filler cap then reinstall seat.

Engine Coolant

Recommended Coolant

Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.

Cooling system must be filled with wa-
ter and antifreeze solution (40% water,
60% antifreeze).

Coolant Level

Remove seat.

V01C02Y

V01C03Y



WARNING

Check coolant level with engine
cold. Never add coolant in cool-
ing system when engine is hot.

MIN

MAX

V01L0LY

vmo2000_002b.fm Page 57 Friday, September 17, 1999 10:58 AM

Summary of Contents for Traxter 7415




































































































Search results

Summary of Contents for Traxter 7415

Reviews:

Related manuals for Traxter 7415

Brands by name

Popular brands

BOMBARDIER Traxter 7415, Operator'S Manual

Search results

Summary of Contents for Traxter 7415

Reviews:

Related manuals for Traxter 7415

Brands by name

Popular brands