BOMBARDIER outlander max 800 Operator'S Manual Download Page 33

Page: 33 / 160



WARNING

POTENTIAL HAZARD

Climbing hills improperly.

WHAT CAN HAPPEN

Could cause loss of control, passenger ejection or cause vehicle to overturn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for climbing hills as described further in this Operator's

Guide.
Always check the terrain carefully before you start up any hill. Do not forget, the operator is

responsible for the safety of the passenger. In doubt, disembark him before climbing hill.

Always remember that the vehicle handling, stability and braking distance may be affected

when riding with a passenger.
Never climb hills with excessively slippery or loose surfaces.
Shift operator and passenger weight forward.
Never open the throttle suddenly or make sudden gear changes. The vehicle could flip over

backwards.
Never go over the top of any hill at high speed. An obstacle, a sharp drop, or another vehicle

or person could be on the other side of the hill.

V00A1MQ

Summary of Contents for outlander max 800

































































































































































Search results

Summary of Contents for outlander max 800

Reviews:

Related manuals for outlander max 800

Brands by name

Popular brands

BOMBARDIER outlander max 800, Operator'S Manual

Search results

Summary of Contents for outlander max 800

Reviews:

Related manuals for outlander max 800

Brands by name

Popular brands