BOMBARDIER outlander max 800 Operator'S Manual Download Page 16

Page: 16 / 160

OPERATION WARNINGS

While reading this Operator’s Guide, remember that:

NOTE:

The following illustrations are general representations only. Your model may differ.



WARNING

Indicates a potential hazard that, if not avoided, could result in serious injury or death.



WARNING

POTENTIAL HAZARD

Operating this vehicle without proper instruction.

WHAT CAN HAPPEN

The risk of an accident is greatly increased if the operator does not know how to operate this

vehicle properly in different situations and on different types of terrain with or without pas-

senger.

HOW TO AVOID THE HAZARD

Beginning and inexperienced operators should complete the training course offered by BRP.

They should then regularly practice the skills learned in the course and the operating tech-

niques described further in this Operator’s Guide.
For more information about the training course, contact an authorized Bombardier ATV

dealer.

V00A0AQ

Summary of Contents for outlander max 800

































































































































































Search results

Summary of Contents for outlander max 800

Reviews:

Related manuals for outlander max 800

Brands by name

Popular brands

BOMBARDIER outlander max 800, Operator'S Manual

Search results

Summary of Contents for outlander max 800

Reviews:

Related manuals for outlander max 800

Brands by name

Popular brands