BOMBARDIER outlander max 800 Operator'S Manual Download Page 119

Page: 119 / 160

117

Vehicle cannot reach full speed

1. Engine.

– See ENGINE LACKS ACCELERATION OR POWER.

2. Parking brake.

– Ensure brake lever lock is completely removed.

3. Air filter/box plugged or dirty.

– Check air filter and clean if necessary.
– Check deposits in air box drain.
– Check the position of the air intake tube.

4. CVT dirty or worn-out.

– Contact an authorized Bombardier ATV dealer.

5. Engine is under a protection mode.

– Check speedometer multi-function display for messages.
– Speedometer CHECK ENGINE indicator lamp is on and multi-function display shows

CHECK ENGINE or LIMP HOME, contact an authorized Bombardier ATV dealer.

Transmission lever is hard to move

1. Transmission gears are in a position that prevents the transmission lever to work.

– Rock the vehicle back and forth to move the gears in the transmission and allow the

transmission lever to be set.

2. CVT dirty or wear.

– Contact an authorized Bombardier ATV dealer.

The RPM increases but the vehicle does not move

1. The transmission is on PARK or NEUTRAL position.

– Select the R, HI or LO position.

2. CVT dirty or worn-out.

– Contact an authorized Bombardier ATV dealer.

3. Water in the CVT housing.

– Contact an authorized Bombardier ATV dealer.

Summary of Contents for outlander max 800

































































































































































Search results

Summary of Contents for outlander max 800

Reviews:

Related manuals for outlander max 800

Brands by name

Popular brands

BOMBARDIER outlander max 800, Operator'S Manual

Search results

Summary of Contents for outlander max 800

Reviews:

Related manuals for outlander max 800

Brands by name

Popular brands