Bomar Ergonomic 320.250 DG, Operating Instructions Manual

Page: 23 / 115

23
Do
ku
me
nt
ace s
troje
Do
ku
me
nt
at
ion der
Mas
c
hi
nen
Machine docume
ntation
Component Description
Hand wheel assembling
Take down the nut from holder of the hand wheel.
Insert it to the hole on back side of the wheel and
screw on the holder.
Length stop assembly
1. Take on the length stop to the hole on vice side.
2. Shift the length stop till the saw band (arrow 1)
and set the scale to the value „0“ (arrow 2).
3. Secure it with screw on the bottom side of the
vice.
Drainage metal plate installing
Install drainage metal plate on the backside of the
band saw.
Lifting spring assembly
1. Lift the saw arm up.
2. Unscrew the screw and remove the washer from
the holder.
3. Put together the spring and draw bar. Put the
assembly on the holder and the console
4. Put the washer on the holder and screw on the
screw.