BOMANN VS 7329, Instruction Manual

Page: 19 / 28

19
•
To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance overview
1 Interior light
2 Glass shelves
3 Fresh box
4 Fruit/Vegetable
boxes
5 Door storage
racks
Delivery scope
5x glass shelf, 1x fresh box, 2x fruit/vegetable box
with glass cover, 4x door storage rack, 1x egg tray,
1x door handle incl. fixing screws with covers,
for reversing the door opening:
1x door hinge cover,
1x door stopper
Installation
Conditions for the installation location
•
Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
-
Gap to the back approx. 50 ～ 70 mm, to the
side walls and above the device each approx.
min. 100 mm;
- Place the appliance so that the appliance door
can open without being impeded.
•
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
The climate class can be found under "Technical
Data" and on the rating label located in the interior
or on the appliance rear.
•
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
•
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
- at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
- near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
- Do not expose the appliance any weather.
Assembling the door handle
• Carefully remove the cover caps on the door outs-
ide.
•
Tighten the handle with the enclosed screws in
the holes.
•
Put the included screw covers on.