55
Connect the drain hose to a drainpipe (B) with a
minimum diameter of 40 mm; alternatively, the
drain hose can be fixed directly to the sink (A).
Always make sure that the hose is not bent or
squeezed.
The drain hose may only install maximal up to a
height of 600 mm above the rinsing floor.
Secure the drain hose securely to avoid a change
in position and with it a water leakage.
Electrical connection
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Improper connection may cause to an electric
shock!
Do not use multiple sockets or extension cords.
It is not allowed to modify the plug provided with
the appliance! If the plug does not fit properly to
the outlet, let install a proper outlet by an author-
ized specialist.
The accessibility of the power plug must always
be ensured to disconnect the device from the
power supply in case of an emergency.
Make sure that the voltage supply matches the
specifications on the rating label (door frame) be-
fore connecting.
Connect the mains cable to a properly installed
and earthed wall outlet.
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Prior Using for the first Time
Before using your dishwasher for the first time:
A. Fill the rinse aid dispenser
B. Fill in detergent
CAUTION:
Use only detergent for dishwashers. Other prod-
ucts may damage the unit.
Always consider the dosage and storage recom-
mendations on the sales packaging.
WARNING:
Keep detergent out of reach for children.
A.
Fill the rinse aid dispenser
Function of rinse aid
The rinse aid is automatically added during the final
rinse, ensuring thorough rinsing and a spot and
streak free drying.
When to refill the rinse aid dispenser
If the corresponding message
does not light up in the display,
you can estimate the amount
of remaining rinse aid to the
optical level indicator (D) next to the dispenser.
When the rinse aid dispenser is full, the indicator is
completely dark. If the rinse aid diminishes, the size
of the black dot changes as shown below. In order to
avoid spotting, the rinse aid level must not drop be-
low ¼.
full
¾ full
½ full
¼ full
empty
