59
Program
Program selection
information
Program sequence
Detergent
tablet
Time
(Min)
Energy
(kWh)
Water
(l)
90 Min.
for lightly soiled dishes
Main rinse (65°C)
Rinse
Rinse
Rinse (70°C)
Drying
1 Tab
90
1.100
6.6
Soak
for dishes, which should
be rinsed later in the
day
Pre-rinse
-
15
0.020
2.0
NOTE:
*ECO program is the test cycle. The information for comparability test
in accordance with EN60436
.
General information!
The ECO program is suitable for cleaning normally soiled dishes, which is the most efficient program in
terms of combined energy and water consumption. The program is used to check compliance with EU e-
codesign legislation.
Loading the domestic dishwasher to the specified capacity helps to save energy and water.
Manual pre-washing of the dishes leads to higher water and energy consumption!
Washing dishes in a household dishwasher generally uses less energy and water than hand washing,
provided the dishwasher is used according to the instructions.
Control panel
1
Power: Press the button to turn on/off the pow-
er supply.
2
Program: Button to select the rinse programs.
3
Delay: Button to select the start delay by
2, 4, 6 or 8 hours. Press the Start/Pause button
and the appliance start automatically after the se-
lected time delay has expired.
4
Start/Pause: button to start/pause the select-
ed or running program.
5
Control lamp: lights up when rinse aid must be
added.
Control lamp: lights up, when the water supply
is closed.
6
The control lamps indicate the program selection.
7
The control lamps indicate the start delay selec-
tion. 6h is indicated by 2h and 4h simultaneously.
