BOMANN KSG 239, Instruction Manual

Page: 15 / 20

15
•
In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION: Transport protection! CAUTION: Transport protection! CAUTION: Transport protection! CAUTION: Transport protection!
Remove the Styrofoam part between appliance back
and condenser (metal grille).
NOTE NOTE NOTE NOTE::::
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance Equipment Appliance Equipment
Appliance Equipment
Appliance overview Appliance overview Appliance overview Appliance overview
1111 On/Off switch
interior light
2
2 2
2 Temperature
control
3333 Control indication
thermostat position
4 4 4 4 Control lamp
power supply
5
5 5
5 Interior light
6
6 6
6 Circulation fan
7
7 7 7 Grid shelves
8888 Door lock
9
9 9 9 Condenser
10
10 10 10 Water collecting
tray
11
11 11
11 Compressor
Delivery scope Delivery scope Delivery scope Delivery scope
5x Grid shelf, 2x key for door lock, 2x spacers
Installation Installation Installation Installation
Condition
Condition Condition
Conditions for the installation location
s for the installation location s for the installation location
s for the installation location
•
Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
-
Gap to the back and to the side walls each
approx. 10 cm by using the spacers;
-
Place the appliance so that the appliance door
can open without being impeded.
•
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to the “Product Data Sheet” or to the rating label
located in the interior or on the appliance rear.
•
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
•
Avoid the installation: Avoid the installation: Avoid the installation: Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
-
at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
-
near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
-
Do not expose the appliance any weather.
Fitting the spacers
Fitting the spacers Fitting the spacers
Fitting the spacers
Insert the supplied spacers (1)
into the holder (2) on the back of
the unit.
Electrical connection Electrical connection Electrical connection Electrical connection
WARNING: WARNING: WARNING: WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an electric
electric electric
electric
shock
shock shock
shock!
•
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.