19
Problem
Possible cause / Action
White film
on inside
surface
Hard water minerals: clean the interi-
or by using a damp sponge with
dishwasher detergent. Wear rubber
gloves.
Unsatisfac-
tory drying
result
∙ Improper loading ∙ dishes are re-
moved too soon ∙ wrong program has
been selected ∙ use of cutlery with a
low-quality coating
Error codes
For some malfunctions, the display will show the
following error codes to warn you:
Code
Meaning / possible cause
E1
Water inlet fault! Faucet not open, inlet
blocked or water pressure too low.
E3
Malfunction of heating element.
E4
Overflow / water leakage!
Ed
Failure of communication between main
PCB with display PCB.
CAUTION:
If overflow occurs, turn off the main water supply
before calling an authorized technician.
If there is water in the lower housing part due to
an overfilling or a small leak, remove this water
before restarting the appliance.
NOTE:
If a problem persists after following the steps above,
please contact your distributor or an authorized tech-
nician.
Technical Data
Electrical connection / Water supply………....………..
Connection voltage: …..…..……..220-240 V~ / 50 Hz
Rated power: …………..……….…..….1760 – 2100 W
Rated current: ………………………..…………….10 A
Water pressure: ………………….....……0.04 – 1 Mpa
Dimension H x W x D / Weight..……...………………..
Unit size: ………………..…....…84.5 x 44.8 x 60.0 cm
Net weight: ………...…….…..…..………....ca. 36.5 kg
Available accessory……………………………………..
Inlet hose safety system: ………….Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where these can be disposed
of can be obtained from your local authority.
WARNING:
Remove or disable any existing snap and bolt locks,
if you take the unit out of operation or dispose it.
