14
Program
Program selection
information
Program sequence
Detergent
pre/main (g)
Time
(Min)
Energy
(kWh)
Water
(l)
90 Min.
for lightly soiled dishes
Main rinse (60°C)
Rinse
Rinse (65°C)
Drying
22
(or Tab)
90
1.350
11.7
Rapid
rapid rinse cycle for
lightly soiled dishes
without drying
Main rinse (50°C)
Rinse
Rinse (45°C)
20
30
0.751
11.2
NOTE:
*ECO program is the test cycle. The information for comparability test
in accordance with EN60436
.
General information!
The ECO program is suitable for cleaning normally soiled dishes, which is the most efficient program in
terms of combined energy and water consumption. The program is used to check compliance with EU e-
codesign legislation.
→ Informationen for the comparability test:
Capacity: 14 settings; Position of upper basket: lower position; Rinse aid setting: Max; Softener setting: H3
Loading the domestic dishwasher to the specified capacity helps to save energy and water.
Manual pre-washing of the dishes leads to higher water and energy consumption!
Washing dishes in a household dishwasher generally uses less energy and water than hand washing,
provided the dishwasher is used according to the instructions.
Control panel
1
Power: button to turn on/off the power supply.
2
Delay: button to select the start delay by
1-24 hours. Select the operating conditions and
start the program. The device starts automatically,
after the selected time has elapsed.
3
Program: Button to select the rinse program.
4
: Button to activate/deactivate the ½ loading
function. Consider that the function is program
dependent!
