18
Problem
Possible cause / Action
Cloudiness
glassware
Use less detergent if you have soft
water and select a shortest cycle to
rinse and clean glassware.
Black or
grey marks
Aluminum utensils have rubbed
against dishware. Use a mild abra-
sive cleaner to eliminate those marks.
Stains on
inner sur-
face
Only use detergents without color-
ants.
White film
on inside
surface
Hard water minerals: clean the interi-
or by using a damp sponge with
dishwasher detergent. Wear rubber
gloves.
Unsatisfac-
tory drying
result
∙ Improper loading ∙ dishes are re-
moved too soon ∙ wrong program has
been selected ∙ use of cutlery with a
low-quality coating
Error codes
For some malfunctions, the display will show the
following error codes to warn you:
Code
Meaning / possible cause
E1
Water inlet fault! Faucet not open, inlet
blocked or water pressure too low.
E3
Malfunction of heating element.
E4
Overflow / water leakage!
Ed
Failure of communication between main
PCB with display PCB.
CAUTION:
If overflow occurs, turn off the main water supply
before calling an authorized technician.
If there is water in the lower housing part due to
an overfilling or a small leak, remove this water
before restarting the appliance.
NOTE:
If a problem persists after following the steps above,
please contact your distributor or an authorized tech-
nician.
Technical Data
Electrical connection / Water supply………....………..
Connection voltage: …..…..……..220-240 V~ / 50 Hz
Rated power: …………..……….…..….1760 – 2100 W
Rated current: ………………………..…………….10 A
Water pressure: ………………….....……0.04 – 1 Mpa
Dimension H x W x D / Weight..……...………………..
Unit size: ………………..…....…84.5 x 59.8 x 60.0 cm
Net weight: ………...…….…..…..………....ca. 44.8 kg
Available accessory……………………………………..
Inlet hose safety system: ………….Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
