4
12/2011
- The minimum permissible inlet water pressure is 0.04 Mpa.
- Remove the door to the washing compartment when removing an old dishwasher from service or
discarding it.
Unpacking
Check the device for any possible transport damage. Do not install a damaged device. In case of
damage, please contact your distributor.
Removing the transport protection
The device and parts of the interior are protected for transport. Remove all adhesive tapes. You may
remove adhesive residue with a cleaning solvent. Also remove any adhesive tapes and packaging
materials from the inside of the device.
2.
D
ISPOSAL
O
F
U
SED
A
PPLIANCES
This product is marked in accordance with the European waste regulation
2002 / 96 / EC - WEEE
It regulates the proper disposal of the product. Environmentally friendly disposal will pre-
vent possible negative consequences to health caused by improper disposal.
This symbol on the product or its packaging indicates that this product must not be dis-
posed of with the regular household waste. The user has to return the product to a collection point for
the recycling of electric and electronic equipment.
The disposal must comply with the local regulations in place.
For further information please contact your local authorities or waste collection service.
Disable waste equipment before disposal:
- Disconnect the mains plug from the wall socket.
- Disconnect the plug from the mains cable.
- Remove or disable any existing spring or latch locks.
This will prevent children from locking themselves (risk of suffocation!) or from getting into perilous
situations. Children might not understand the risks that arise from handling household devices.
Therefore, observe children and make sure they do not play with the device.
Environmental protection
- Do not use excessive detergents.
- Decontaminant and bleacher can be used to pre-treat the stains on the clothes only when very
necessary.
Packaging material
The packaging for transportation of the device and individual parts is produced of recyclable materials.
- corrugated cardboard / paperboard (mainly of waste paper)
- form part of PS (foamed, CFC-free polystyrene)
- Films and bags of PE (polyethylene)
- Strapping strips of PP (polypropylene)
IMPORTANT
Make sure you dispose of packaging materials environmentally friendly.
