BOMANN GS 7343, Instruction Manual

Page: 26 / 32

26
Switching off
To switch off the appliance, disconnect the appliance
from the power supply.
If the appliance is out of use for long periods:

Remove the appliance content.

Defrost (model dependent) and clean the appli-
ance thoroughly (see
”Cleaning and Mainte-
nance” ).

Leave open the appliance door to avoid formation
of mold and unpleased odors.
Tips for energy saving

Disconnect the appliance from the power supply if
it isn’t in use.

Do not install the appliance near stoves, heaters
or other heat sources. In case of higher ambient
temperatures, the compressor will run more fre-
quently and longer.

Ensure enough ventilation at the bottom and rear
side. Never block ventilation openings.

Place all shelves, racks or drawers (depending on
model) in their original position.

Adjust the temperature not colder than necessary.

Allow warm food to cool before placing it in the
appliance.

Open the unit door only as necessary.

Defrost the unit regularly (model dependent).

The seal of the appliance door must be complete-
ly intact, so that the door closes properly.
Cleaning and Mainenance
WARNING:

Always disconnect the appliance from the power
supply before cleaning and user maintenance.

Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage
the plastic parts.
WARNING:

The unit must be dry before restarting operation.
CAUTION:

Do not use a wire brush or other sharp, abrasive
items.

Do not use any acidic or abrasive detergents.

Do not damage the refrigerant circuit.
Cleaning the appliance including interior

Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent; or with a clean,
damp microfiber cloth without cleaning agent.

Remove the appliance content and storage it at a
cool location.

After everything was thoroughly dried, you can
restart the operation.

Depending on model:
Wipe at least once a year
the dust that has accumulated on the appliance
back and condenser (metal grille). To do this, use
a soft brush or a vacuum cleaner.
Defrosting
The appliance remains ice-free thanks to the fully
automatic No-Frost-system. Defrosting is not neces-
sary.
Troubleshooting
Before you contact an authorized specialist
Problem / Cause / Action
Unit is not working properly or at all
-
Check the power supply / temperature setting /
ambient temperature.
-
Unblock the ventilation openings, install the ap-
pliance freely.