•
The appliance is suitable for three
current (
220-240/380-415V 3N~ 50
•
The appliance can be adjusted for single
current by a respective bypass on the terminal
block, based on the circuit diagram below. Select
a suitable cord as mains cable, considering the
connection type and nominal power of the oven.
•
Fix the mains cable in the tension relief.
•
Make sure to connect the protective ground
terminal of the marked terminal block.
•
The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency swi
least 3 mm.
•
Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
or corners.
Connecting the hob to the oven
Connecting the hob to the oven
Connecting the hob to the oven
Connecting the hob to the oven
Insert the plugs at the end of the hob
the appropriate socket of the oven terminal block.
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Permissible connection methods
Permissible connection methods
Permissible connection methods
Permissible connection methods
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Each connection requires the protective ground of the
mains to be connected to the P
PP
PE
EE
E
terminal.
NOTE
NOTE
NOTE
NOTE::::
L1, L2, L3 = Phase | N = Neutral
PE
= Protective ground
220-240V~
50Hz
380-415V 3N~
50Hz
H05 VV-F3G
4mm²
H05 VV-F4G
2.5mm²
8
The appliance is suitable for three-phase and AC
50/60Hz
).
The appliance can be adjusted for single-phase
on the terminal
block, based on the circuit diagram below. Select
a suitable cord as mains cable, considering the
connection type and nominal power of the oven.
Fix the mains cable in the tension relief.
Make sure to connect the protective ground to the
the marked terminal block.
The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency switch must be at
Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
at the end of the hob circuit group in
of the oven terminal block.
Each connection requires the protective ground of the
terminal.
380-415V 3N~
50Hz
H05 VV-F5G
1.5mm²
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Before initial use
Before initial use
Before initial use
Before initial use
•
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
•
In order to burn any manufacturing residue, h
the closed oven for approx. 30 minutes at 25
NOTE
NOTE
NOTE
NOTE: : : :
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore e
sure for a good ventilation of the room during
heating.
Operation
Operation
Operation
Operation
1111 Level regulator of cooking zones
Level regulator of cooking zones
Level regulator of cooking zones
Level regulator of cooking zones
The temperature setting is set for each cooking zone
separately by using the respective level regulator.
=
Position of cooking zone
0000 = Off-position
1111 = Lowest setting (keep food warm)
6666 = highest setting (quick heating a
roasting)
2222 Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
The power control lamp indicates the operation of the
cooking zones. It lights up as soon as a cooking zone
is put into operation and goes off if all level regulators
points to the off-position.
3333 Oven function selector switch
Oven function selector switch
Oven function selector switch
Oven function selector switch
The function selector switch is used to set the
heating. Rotate the function selector switch until the
icon for the desired type of heating points upwards.
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
In order to burn any manufacturing residue, heat
the closed oven for approx. 30 minutes at 250°C.
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore en-
sure for a good ventilation of the room during
Level regulator of cooking zones
Level regulator of cooking zones
Level regulator of cooking zones
Level regulator of cooking zones
set for each cooking zone
respective level regulator.
Position of cooking zone
Lowest setting (keep food warm)
= highest setting (quick heating and cooking,
Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
indicates the operation of the
cooking zones. It lights up as soon as a cooking zone
is put into operation and goes off if all level regulators
Oven function selector switch
Oven function selector switch
Oven function selector switch
Oven function selector switch
The function selector switch is used to set the type of
Rotate the function selector switch until the
type of heating points upwards.
