11
•
Confirm the setting.
The symbol shows the activation of the alarm
function.
Use the button to briefly display the remain-
ing time of the alarm function.
After the alarm time has elapsed, an acoustic sig-
nal sounds for about a minute and the symbol
flashes until any button has been pressed.
Several signal tones sound after the alarm time
has elapsed. Press any button to end it prema-
turely.
Reset the alarm time to [00:00] if you wan to end
it early.
Pyrolysis function
Pyrolysis function
Pyrolysis function
Pyrolysis function
First read the instructions for pyrolysis carefully un-
der
“Special safety instructions for this Unit”
and un-
der
“Cleaning and Maintenance”
.
•
KB1
KB1
KB1
KB1 Select the self-cleaning function.
The temperature display shows [PYA].
The standard time [1:30] flashes.
•
KB2
KB2
KB2
KB2 Set the cleaning time between 60:00
minutes and 2:30 hrs./min.
Determine the cleaning time depending on the de-
gree of soiling.
•
Start the function.
Pyrolysis setting mode
Pyrolysis setting mode
Pyrolysis setting mode
Pyrolysis setting mode
Pyrolysis active
Pyrolysis active
Pyrolysis active
Pyrolysis active
As soon as the pyrolysis function is active, the ap-
pliance door is locked.
The symbol
indicate the door lock.
After the cleaning time has ended and as soon as
the cavity temperature is lower than 280°C, the
unit door is unlocked.
Oven lighting
Oven lighting
Oven lighting
Oven lighting
The oven lighting automatically turns on as soon as
the oven is in operation.
The oven lighting is switched off during the pyrolysis
function.
Interrupting / Ending prematurely oven operation
Interrupting / Ending prematurely oven operation
Interrupting / Ending prematurely oven operation
Interrupting / Ending prematurely oven operation
•
To interrupt the operation or to end the set-
tings prematurely..
-
Press the button
Press the button
Press the button
Press the button 1x
1x
1x
1x to interrupt the operation:
The current display indicators flashes.
-
Press the button for approx. 3 seconds
Press the button for approx. 3 seconds
Press the button for approx. 3 seconds
Press the button for approx. 3 seconds to end
the operation prematurely.
•
Press the button to continue the operation or
make a possible restart.
Oven operation ended
Oven operation ended
Oven operation ended
Oven operation ended
At the end of the cooking time the oven operation
ended. A beep will sound for about 5 minutes until
any button is pressed.
The cooling fan continues to run until the oven tem-
perature is below 100°C.
•
Push the oven selector switches into the control
panel to prevent unintentional operation.
Using the accessory
Using the accessory
Using the accessory
Using the accessory
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Always insert the accessory completely into the
oven; otherwise the glass door can be scratched.
Inside the oven are
side racks 1-5 levels
for inserting the ac-
cessories.
The accessories are safely used between the side
levels.
