21
Cleaning the aluminum grease filte
Cleaning the aluminum grease filte
Cleaning the aluminum grease filte
Cleaning the aluminum grease filterrrr
WARNUNG: Risk of fire!
WARNUNG: Risk of fire!
WARNUNG: Risk of fire!
WARNUNG: Risk of fire!
Grease residue in aluminum grease filter may ignite
at intense heat. Therefore, clean the grease filter
regularly!
We recommend cleaning the grease filter monthly:
•
Remove the aluminum grease filter by sliding
back the lock in the handle recess, push the filter
down gently and pull out towards the front.
•
Rinse the grease filter in a solution of hot water
and neutral detergent. Soak the filter in it.
•
Then clean with a soft brush, rinse thoroughly with
hot water and allow drying.
•
Alternatively, the grease filter can also be cleaned
in the dishwasher (up to 65°C). Slight discolora-
tion may occur. This does not affect the function
of the grease filter.
Replacing the activated carbon filter
Replacing the activated carbon filter
Replacing the activated carbon filter
Replacing the activated carbon filter
The activated carbon filter prevents odors and must
depend on the use but be changed at least every six
months.
Order the carbon filter from your dealer or in our
online accessories shop,
www.bomann
www.bomann
www.bomann
www.bomann----germany.de
germany.de
germany.de
germany.de
.
Use the reference number found under “Technical
Data”.
•
See “Installing the activated carbon filter for recir-
culation mode”.
•
Remove and dispose the old carbon filter.
Replacing the bulb
Replacing the bulb
Replacing the bulb
Replacing the bulb
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Do NOT
NOT
NOT
NOT remove the LED lighting cover!
The bulb may only be replaced by an authorized
specialist in case of a defect.
WAR
WAR
WAR
WARNING
NING
NING
NING::::
•
The light of LED lamps is very bright and can
damage the eyes. Never
. Never
. Never
. Never look directly into the
LED light!
•
Disconnect the appliance from the power supply
and allow the lamps to cool down before changing
the lamp. Ther
Ther
Ther
There is a risk of burns!
e is a risk of burns!
e is a risk of burns!
e is a risk of burns!
NOTE
NOTE
NOTE
NOTE::::
Order the lamps from your dealer or in our online
accessories shop
www.bomann
www.bomann
www.bomann
www.bomann----germany.de
germany.de
germany.de
germany.de
.
Lamp data:
Lamp data:
Lamp data:
Lamp data:
LED max. 1 x 2.0W, AC 12V, ILCOS D Code after
EN 61231: DBS-2/30-H-120-33
•
Remove the grease filter.
Depending on model (a)
or (b):
Open the black protective box of the plug-in
device and release the plug connection.
•
Carefully push the lamp out of the holder.
•
Replace defect LED module and connect the two
ends of the plug-in device.
•
Insert new lamp properly in the bulb holder.
•
Close the protective box with inserted plug-in
device. Replace the grease filter.
