•
For extraction mode, you must also create a feed through of approx. Ø 130 mm in the base of the unit.
•
If the mains cable is fed through the unit, a feed through also must be provided.
•
Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the
including washers (3) under the wall unit and tighten the nuts (4) through the hood body.
•
For extraction mode insert the connecting
Thereto a flexible extraction hose (not supplied)
connected to the outside by an extraction vent.
•
For recirculation mode close the air outlet
•
Reinstall the grease filter grid or aluminum grease filter.
Installing the activated carbon filter
Installing the activated carbon filter
Installing the activated carbon filter
Installing the activated carbon filter mat
mat
mat
mat
Model: DU 622
Model: DU 622
Model: DU 622
Model: DU 622.1
.1
.1
.1
•
Remove the grease filter grid (3) including fleece filter. Loosen the moun
ing wires (1) that hold the fleece filter in position.
•
Insert the previously fitted carbon filter
clamp the mounting wires in again.
•
Reinstall the grease filter grid
Model: DU 623
Model: DU 623
Model: DU 623
Model: DU 623.1
.1
.1
.1 IX
IX
IX
IX
•
Remove the aluminum grease filter (1).
•
Insert the previously fitted carbon
fix the mat parts each with two metal struts (2) (
filter mat).
•
Reinstall the
NOTE
NOTE
NOTE
NOTE::::
The carbon filter mat absorbs odours
Electrical connection
Electrical connection
Electrical connection
Electrical connection
WARNING:
WARNING:
WARNING:
WARNING:
•
The installation to the mains supply must conform to the local standards and regulations.
•
Improper connection may cause to an
•
Do not modify the appliance plug
an authorized specialist.
•
The accessibility of the power plug must be ensured in order to disconnect the
supply in case of an emergency.
20
must also create a feed through of approx. Ø 130 mm in the base of the unit.
If the mains cable is fed through the unit, a feed through also must be provided.
Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the
including washers (3) under the wall unit and tighten the nuts (4) through the hood body.
For extraction mode insert the connecting piece with non-return valves (5) from above onto the air outlet.
Thereto a flexible extraction hose (not supplied) with an inner diameter of Ø 120 mm must be fitted and
connected to the outside by an extraction vent.
For recirculation mode close the air outlet by putting on the cover (6).
Reinstall the grease filter grid or aluminum grease filter.
mat
mat
mat
mat for recirculation mode
for recirculation mode
for recirculation mode
for recirculation mode
Remove the grease filter grid (3) including fleece filter. Loosen the moun
ing wires (1) that hold the fleece filter in position.
Insert the previously fitted carbon filter mat (2) onto the fleece filter and
clamp the mounting wires in again.
Reinstall the grease filter grid with fixed fleece filter and carbon filter mat.
Remove the aluminum grease filter (1).
Insert the previously fitted carbon filter mat parts onto the grease filter and
fix the mat parts each with two metal struts (2) (supplied with
filter mat).
Reinstall the aluminum grease filter with fixed carbon filter mats.
odours and must be replaced at least every six months
The installation to the mains supply must conform to the local standards and regulations.
Improper connection may cause to an electric shoc
electric shoc
electric shoc
electric shock!
k!
k!
k!
plug. If the plug does not fit properly to the outlet, let install a proper outlet by
The accessibility of the power plug must be ensured in order to disconnect the appliance
must also create a feed through of approx. Ø 130 mm in the base of the unit.
Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the screws
including washers (3) under the wall unit and tighten the nuts (4) through the hood body.
) from above onto the air outlet.
with an inner diameter of Ø 120 mm must be fitted and
Remove the grease filter grid (3) including fleece filter. Loosen the mount-
mat (2) onto the fleece filter and
fleece filter and carbon filter mat.
filter mat parts onto the grease filter and
supplied with the carbon
aluminum grease filter with fixed carbon filter mats.
regardless of use.
The installation to the mains supply must conform to the local standards and regulations.
. If the plug does not fit properly to the outlet, let install a proper outlet by
appliance from the power
