![background image](http://html1.mh-extra.com/html/bomann/776031/776031_instruction-manual_2785985048.webp)
48
Replacing the bulb
CAUTION:
Do NOT remove the LED lighting cover!
The bulb may only be replaced by an authorized
specialist in case of a defect.
WARNING:
The LED light is very bright and can damage the
eyes. Never look directly into the LED light!
Disconnect the appliance from the power supply
and allow the lamps to cool down before changing
the lamp. There is a risk of burns!
NOTE:
Order the lamps from your dealer or in our online
accessories shop
www.bomann-germany.de
.
Lamp data: LED max. 2 x 1.5 W, DC 12 V,
ILCOS D Code acc. EN 61231: DSR-1.5/30-S-64
Remove the grease filter(s). Carefully push the
lamp out of the holder through the housing; pull
out the lamp and release the plug connection.
Replace defect LED module and connect the two
ends of the plug-in device.
Insert new lamp properly in the bulb holder. Re-
place the grease filter(s).
Light stripes (ambient lighting)
Lamp data: LED max. 2 x 6.0 W, DC 12 V,
Length 275 mm
Open the protective box below the glass cover
and loosen the light strip holder with a screwdriv-
er. Release the plug connection.
Replace defect LED module and pin the two ends
of the plug-in device.
Insert new light strip properly in the stripe holder.
Close the protective box with inserted plug con-
nection and secure the light strip holder.
Troubleshooting
Before you contact an authorized specialist
Problem
Possible Cause / Solution
Unit is not
working or
not properly
-
Check the power supply.
-
Check the power level.
Unit is not
working
efficiently
-
Check the power level.
-
Is the kitchen properly ventilat-
ed?
-
Clean the grease filter(s).
-
At recirculation mode, check the
carbon filter.
-
Check the air outlet.
Light is not
working
-
Check the bulb, see
“Replacing
the bulb”.
Oil is drip-
ping
-
Clean the grease filter(s).
NOTE:
If you are still having problems after following steps
above, contact your trader or an authorized techni-
cian.