7.1 Loading the machine
Loads may only be attached and hoisted by an expert/qualified
person.
Do not use lifting points that are damaged or impaired in any other
way.
Only use lifting and lashing tackle with sufficient load bearing
capacity for the weight to be loaded. Minimum load bearing
capacity of lifting tackle: see operating weight
Always use appropriate lifting and lashing tackle on the lifting and
lashing points.
Use lifting tackle only in the prescribed direction of load application.
Lifting tackle must not be damaged by machine components.
When lifting the machine, avoid uncontrolled movements of the
load. If necessary, hold the load with guide ropes.
Protective equipment:
n
Protective gloves
1.
Park the machine safely
Chapter 6.5 „Parking the machine
in secured condition“ on page 60
.
2.
Allow the engine to cool down.
3.
Make sure that the protection hood is fastened correctly
Chapter 8.2.1.2 „Closing the protection
.
4.
Move the steering rod to an upright position and engage the
locking pawl lever.
5.
Attach the lifting tackle to the designated lifting eye (1).
6.
DANGER!
Danger to life caused by suspended
loads!
–
Do not step or stand under suspended
loads.
Lift the machine carefully and lower it again at the intended
location.
Fig. 55
Fig. 56
Loading / transporting the machine – Loading the machine
BPR 70/70 D
64
Go
to
Discount-Equipment.com
order
your
parts
