3.
The starter switch is designed with a re-start
lock. The ignition key must first be turned
back to position “0” before a new starting
attempt can be made.
NOTICE!
Components may get damaged!
–
Starting attempts should not exceed 30
seconds uninterrupted or max. 3 times
for 10 seconds. Then allow the starter to
cool down to ambient temperature.
–
If the engine has not started after these
attempts, determine the cause.
Turn the ignition key through position “II” to position “III”.
ð
The starter cranks the engine.
The warning buzzer stops.
NOTICE!
Danger of engine damage!
–
Warm up engine for a short while
before starting work. Do not operate
the engine immediately under full
load.
B-ELE-0072
Fig. 44
Operation – Starting the engine
BPR 70/70 D
56
Go
to
Discount-Equipment.com
to
order
your
parts
