Bomag BPR 45/55 D, Operating Instructions Manual

Page: 62 / 70

Trouble shooting
BOMAG 62 BPR 45/55 D, BPR 55/65 D
7.1 General notes
Please observe strictly the safety regulations
in the corresponding section of these operat-
ing and maintenance instructions.
Malfunctions are frequently caused by incorrect
operation of the machine or insufficient mainte-
nance. Whenever a fault occurs you should there-
fore thoroughly read these instruction on correct
operation and maintenance.
If you cannot locate the cause of a fault or rectify it
yourself by following the trouble shooting chart,
you should contact our customer service depart-
ment.
7.2 Starting with jump wires
Note i
Choose this type of starting if the starter battery is
flat and the machine cannot be started manually
with the recoil starter.
Caution
!
A wrong connection will cause severe damage
in the electric system.
The auxiliary battery must have the same volt-
age as the starter battery.
Fig. 77
l
Loosen the hood fasteners (1) on both sides
and remove the fasteners (2) from both sides
(Fig. 77).
l
Fold the hood back.
l
Remove the battery holder and take off the vi-
bration damping mat.
l
Check insulation mats, brackets and screw
connections, replace if necessary.