Using Your VC-310C as a Wireless TTL Master
|
27
2. Press the Set repeatedly until the group A:B ratio value is highlighted.
3. Use the left and right arrows to adjust the A:B ratio by 1/2-stop increments.
4. Press the Set button to confirm your settings and highlight the master channel settings.
5. Use the left and right arrows to select the desired channel (1–4) for the master and groups.
6. Press the Set button to confirm these settings.
Setting up group C:
Group C is the same power output as group B, and it is adjusted by
exposure compensation.
1. In the TTL master and slave group setup, press the F1 function button repeatedly until group C appears
on the LCD.
2. Press the Set button repeatedly until the group C compensation value is highlighted.
3. Use the right and left arrows to adjust the compensation value (±3).
4. Press the Set button repeatedly to your confirm settings, until there is nothing highlighted on the LCD.
Important!
These settings will be saved when you power the unit off and on.
When using multiple slave flash units, select the same group and channel for all units being used in a
particular light position. For example, if you are using three VC-310C units, you might want to set one as a
main light 1A, the second as a fill light 1B, and the third as a hair light 1C. With this setup, you have the option
of setting each group to a different output level via the master flash.