XC 061-AAM.02-MANUAL Rev.03
4
REFERENCE LEGISLATION
AIRBORNE NOISE AND VIBRATIONS:
Sound intensity measurements relating to the noise produced by the machine were taken in
compliance with DIR. 2006/42/EC.
The acoustic pressure was measured at the workstation, at 1 m from the machine surface
and 1.6 m off the ground, in normal machine operating conditions.
Sound intensity measurements gave readings below 70 dB(A).
Measurement of vibrations was not made as these were considered clearly below risk levels.
The intensity of the sound produced by machine operation is normally below sound intensity
caused by the impact of washing water against the walls to be washed.
(00D-010-01-EN)
TERMS OF WARRANTY
1)
The Manufacturer guarantees the rotating head as free of material or construction faults
and defects.
2)
Warranty: 2 years from the date of delivery for EEC countries, 1 year from the date of
delivery for non-EEC countries. During this period the Manufacturer undertakes to repair
or replace parts that present acknowledged construction defects free of charge excluding
transport and labour costs which are entirely at the expense of the purchaser.
3)
The warranty does not cover: all parts that are subject to wear, parts that have been
damaged due to improper use or negligence; these parts are always and entirely at the
Customer’s expense.
4)
The validity of the warranty is at the exclusive and unquestionable judgement of the
Manufacturer.
5)
All spare parts replaced under warranty must be returned to the Manufacturer carriage
free within 20 days maximum, failure to do so shall cause the warranty to be invalidated.
6)
The warranty shall become invalid if the head is intentionally tampered with without the
written authorisation of the Manufacturer.
7)
Any disputes shall be assigned to the jurisdiction of the Judicial Authority of the Reggio
Emilia
Law
Court.
(00C-01-Garanzia-EN)