XC 061-AAM.02-MANUAL Rev.03
15
Fig. 9.4
OK
NO
Kit “Y” pos. 33
Kit “Y” pos. 33
Kit “G”
Kit “G”
5
5
Fig. 9.5
86
Fig. 9.6
80
84 86
85
84
82
Fig. 9.7
Assembly
9.2.4) Insert the O-ring, pos. 6 in the seat of the diffuser pos.33 and lubricate with silicone
grease type KLUBER PARALIQ ® GTE 703.
9.2.5) Fit the diffuser kit on the impeller kit “G” making sure to position the washer pos.5
correctly (see fi g.9.4).
9.2.6) Position the top casing and secure it with the twelve screws pos.57 and the nuts pos.58,
using a dynamometric spanner.
9.2.7) Fit the inlet fi lter back in place, as explained in section 9.1.3 to 9.1.5.
9.3) Replacing the seals (pos.82) on the nozzle holder crown (pos.84)
Disassembly
9.3.1) Clamp the head in a bench vice and, using a suitable screwdriver, unscrew and remove
the screw pos.86 and the washer pos.85 (fi g.9.5).
9.3.2) Take the crown pos.84 off the pin pos.80 (fi g.9.6)
9.3.3) Using the dedicated tool, remove the seals and the o-rings pos.82 from their seats
(fi g.9.7).