18
Network-Network Setting-Network
The network tab is where the user is able to configure the following:
•
DHCP options
o
DHCP – An IP address will be dynamically
assigned to the camera from the gateway (router)
o
Static IP – The user will enter / define the IP
address
•
IP Address
o
Default IP address is 192.168.0.13
•
Subnet Mask
o
Default mask is 255.255.255.0
•
Default Gateway
o
Default gateway is 192.168.0.1
•
Preferred DNS
•
Alternate DNS
•
MAC Address
o
Fixed, can’t be modified.
Network-Network Setting-Port
This setting page is to specify which ports the camera will use to communicate with the following protocols:
o
TCP Port:
o
1 to 65535 adjustable
o
UDP Port:
o
1 to 65535 adjustable
o
RTSP: Default 554
o
RTSP is the protocol used to pull real-time
video over the network (using VLC Player or
other network video-compatible software)
o
Changing this port number will change the way
the RTSP video can be viewed. Most RTSP
streaming software uses port 554 by default,
therefore it is not recommended that this port
number be changed.
o
URL for receive RTSP streaming is:
rtsp://IP:554/PSIA/Streaming/channels/0
o
HTTP: Default 8080
o
HTTP is the protocol used to access the web interface.
o
Changing this port number will require the user to specify the port number when entering the IP address
to the web browser.
o
For example, if it is changed to 85, the IP address will need to be entered as follows in order to access
the web interface:
http://192.168.0.13:85
Network-Network Setting-VISCA OVER IP
1.
Check the Enable option
2.
The port is fi
x
ed as 52381
3.
Click Apply button to make the setting available
