Bolin Technology D20 Series, User Manual

Page: 32 / 54

32
Use the Clear Counters button in the Device View > Status tab to clear the packet errors history for a
device.
Device View
The Device View is used to view and modify detailed information and settings for a specific device. Device view
can be activated by double-clicking a device name in any of the Network View tabs (except Events), or by
selecting Device View from the Device menu (Ctrl + D, or C D) in the Network View window. The
Device View opens in a new window. Multiple device views can be open simultaneously.
The Device View displays some or all the following tabs, allowing you to see different information relating to a
specific Dante device:
■
Receive: Display and configure device’s receive (Rx) channels
■
Transmit: Display and configure device’s transmit (Tx) channels including multicast
■
Status: Device software, clock, and network status information
■
Latency: View latency histograms (supported devices only)
■
Device Config: Rename device, change sample rate, and set other attributes (as relevant to device
type)
■
Video Config: Display certain video configuration parameters and information of the Bolin PTZ
camera and decoder
■
Serial Config: Display important serial control settings and parameters
■
Network Config: View and edit network configuration
Receive Tab
The Receive tab displays a list of all subscribed and dormant receive channels on the current device, plus
subscription information for the subscribed channels. It also allows the creation of subscriptions from the
Available Channels list.
Receive Tab with Bolin Dante AV encoder