30
SV:
Software Version Number that is currently running on the camera, you may need this information for technical support.
Note
The camera video format can be changed by setting bottom DIP switch as well.
Upgrading MCU Firmware
USB Firmware upgrade interface provides capability of constantly improving the camera features and
performances, even for customized function upgrades.
MCU Firmware can be upgraded by following these steps:
1.
Load the .bin file onto a flash drive (Formatted as
FAT32), and name the file “HD20.bin”
2.
With the camera powered off, insert the flash drive
to the USB port on the back panel of the camera
3.
Apply power to the camera
The green indicator light above the lens will turn red for a
few seconds while the upgrade takes place. Once the
upgrade is finished, the light will turn green, and the camera
will proceed through a normal boot cycle. Check the data
on the OSD boot screen
NOTE:
The firmware upgrade process is intended to be performed under the supervision of a BOLIN-Authorized repair
technician. For assistance with this, please contact your authorized BOLIN Technology dealer, installer, or integrator.
BOLIN Technology Technical Support can also be reached for assistance with this process
