11
Conductor:
AWG
Stranding
Material
Nominal Diameter
18
Solid
Bare Copper
0.04 in.
Shield Material
Nom. Capacitance
Conductor to shield
Nom. Inductance
Nom. Char. Impedance
16.2 pF/ft
0.106 µH/ft
75 Ohm
Obtain Video Signal
The camera can simultaneously have SDI video output and HDMI video output and IP video output.
HDMI HD Video signal
1.
Connect the camera to a HD monitor/TV using HDMI cable.
2.
Turn on the camera, video will display on the monitor after running initializing.
3.
Information of the camera initial setting status will display for 5 seconds.
4.
You can set the video format of the camera to the one you want to display.
SDI Video Signal
The camera can simultaneously stream SDI video output with HDMI video output.
1.
Connect SDI cable in between the camera your SDI Device/display.
2.
You now have SDI video output.
3.
SDI video only supports 1080P.
CVBS Video Signal
1.
Connect CVBS cable in between the camera and your CVBS Device/display.
2.
You now have CVBS video output.
Camera Initial setting status Information
Information of the camera initial setting status will display for 5 seconds.
1.
Camera PELCO ID for RS-485 control
2.
Camera ID for IR Remote Controller
3.
IR remote control signal receive current setting
4.
Baud Rate current setting
5.
Control COMM Port current setting
6.
Video format current setting
7.
HDMI current setting
8.
Model number
9.
Firmware version
Type
Layer
Material
Coverage
Tape
1
Aluminum / Polyester / Aluminum 100%
Braid
2
Tinned Copper
95%
PELCO ID
001
IR ID
01
IR-RECEIVE
ON
BAUD RATE
9600
COMM TYPE
232
FORMAT
1080P29.97
HDMI OUT
RGB
MODEL TYPE
----
SV:
V0B010B10040AA002
Camera Status Info Display
