Bolide Technology SVR9004CHD Operating Instructions Manual Download Page 43

Page: 43 / 65

screen.

: Volume switch;

: Record icon: record will be saved to a specified position

: Snapshot function: allow you capture the live images and save it to a specified position. The image

should be saved as *.bmp format.

: clicking the icon will close/open the current channel’s live mode

Or click the right key of mouse on each <Live> window to pop up the interface shown as Picture 6

: CH Display mode

: Allow you open all the <live> channels.

: Allow you close all the <live> channels.

: Display previous channels

: Display next channels

: Click the icon to enlarge current window to full screen; right

you select <Exit full screen>

6.3.1.2 PTZ Control

①

PTZ moving Direction control:

[Auto-cruise] button.

②

PTZ speed control bar

③

:Iris, Focus and Zoom control

④

: Preset setting/clear; Start cruise

6.3.1.3Video control

Show bit rate: show current bit rate;
Original Proportions: show original proportions.

Picture 6-5

: Record icon: record will be saved to a specified position after starting record.

: Snapshot function: allow you capture the live images and save it to a specified position. The image

: clicking the icon will close/open the current channel’s live mode

mouse on each <Live> window to pop up the interface shown as Picture 6

: CH Display mode

: Allow you open all the <live> channels.

<live> channels.

: Display previous channels

: Click the icon to enlarge current window to full screen; right-click to pop

PTZ moving Direction control: allow you control PTZ camera’s direction. And the middle button is called

PTZ speed control bar

:Iris, Focus and Zoom control

Preset setting/clear; Start cruise /stop cruise

Show bit rate: show current bit rate;
Original Proportions: show original proportions.

：

Adjust video Hue;

：

Adjust video brightness;

：

Adjust video Contrast;

：

Adjust video saturation;

：

Recover ex

Picture 6-6

User Manual

after starting record.

: Snapshot function: allow you capture the live images and save it to a specified position. The image

mouse on each <Live> window to pop up the interface shown as Picture 6-4.

click to pop-up menu options, now allow

allow you control PTZ camera’s direction. And the middle button is called

Adjust video Hue;

Adjust video brightness;

Adjust video Contrast;

Adjust video saturation;

Recover ex-factory default

Summary of Contents for SVR9004CHD


































































Search results

Summary of Contents for SVR9004CHD

Reviews:

Related manuals for SVR9004CHD

Brands by name

Popular brands

Bolide Technology SVR9004CHD, Operating Instructions Manual

Search results

Summary of Contents for SVR9004CHD

Reviews:

Related manuals for SVR9004CHD

Brands by name

Popular brands